Custom Compression Tights Manufacturer for Training and Running Brands
Full-length compression tights are among the hardest activewear styles to manufacture consistently. The fabric must hold shape through hundreds of wash cycles, the waistband must stay put under impact, and the inseam must resist shear at the inner thigh.
Passion Activewear manufactures custom compression tights for training and running labels at Quanzhou Passion Clothing Co., Ltd., operating since 1999. Across 10 production lines and 150,000 pieces of monthly capacity, we build tights with documented elongation and recovery, a crotch gusset as standard, and a contoured waistband engineered to resist rolling.
-
01
Documented Elongation & Recovery
Every base fabric is tested for stretch and return before bulk, so the tight fits the same after week twenty as on day one.
-
02
Crotch Gusset Standard
A diamond gusset is sewn into every pair, removing the centre seam that causes chafe and shear failure in cheap tights.
-
03
Contoured No-Roll Waistband
The waistband is shaped to the body and bonded at the edges, so it stays anchored through running, jumping and sit-ups.
What We Manufacture in This Category
- Buttery Soft Fabric Yoga Tops — lightweight knit tops with a second-skin hand feel for low-impact studio sessions.
- Compression Crop Top Sets — matched crop and tight sets engineered as a single coordinated release.
- Compression Sports Bras — medium-to-high support bras built on the same four-way knit platform.
- Slim Fit Yoga Jackets — studio-to-street layers with thumbholes and secure zip pockets.
- Squat-Proof Leggings — our highest-volume style with stretch opacity testing on the final fabric.
- V-Shape High-Waisted Capris — contouring V-seam capris with double-needle no-roll hems.
- 4-Way Stretch Bike Shorts — compressive shorts for cycling and high-heat training blocks.
Hot-Selling Compression Tights
The styles running and training brands reorder most often, from our 7/8 base tight to the full-length thermal option. Send us your tech pack or a reference garment and we return a pre-production sample for approval before bulk.
WOMENS High Rise Legging
Send Inquiry
WOMENS High Rise Picot 7/8 Legging
Send Inquiry
WOMENS High Rise Run Skort
Send Inquiry
WOMENS Run Mid Rise Short
Send Inquiry
WOMENS High Rise Skort
Send Inquiry
Compression tights
Send Inquiry
Fabric & Construction Engineering
A compression tight lives or dies on its knit. We spec yarn, density and recovery together rather than picking a fabric first, which is why the same pattern behaves differently across our three base weights.
- Main Fabric
- 78% nylon / 22% spandex or 75% recycled poly / 25% spandex, 220–260 gsm four-way stretch knit
- Alternative Fabrics
- Brushed thermal knit for cold-weather runs, mesh-insert versions for heat training, GRS 4.0 recycled blends
- Moisture Management
- Wicking finish with documented dry-rate performance; optional mesh panels behind the knee
- Printing Techniques
- Sublimation for all-over graphics, heat-transfer for small marks, silicone screen for raised logos
- Embroidery
- Logo embroidery on the waistband or thigh, kept to low-stretch zones to protect recovery
- Hardware
- Hidden slip pocket at the rear waist, bonded facing, flat-locked seams at all high-shear points
- Size Range
- Women’s XS–3XL and men’s S–3XL, graded to your size chart with inseam options
- Quality Standard
- In-line inspection plus AQL 2.5 final random inspection before packing
Tight-specific construction details
- Diamond crotch gusset sewn on every pair to remove the centre seam and the chafe it causes.
- Contoured waistband shaped to the natural waistline and bonded at the edge to stop forward roll.
- Flat-locked inseam with reduced bulk so the inner thigh seam does not mark through the tight.
- Graduated panel layout that places higher stretch where the leg extends and lower stretch at the waist.
- Reinforced ankle hem with a clean finish that resists the curl common on cheaper full-length tights.
For running and training brands: we run elongation and recovery testing on your nominated base fabric and return the numbers with the pre-production sample, so the compression claim on your page is backed by a measurement rather than a guess. Tell us the target stretch percentage at order stage.
Why Brands Manufacture Compression Tights With Us
Recovery data, not just a fabric swatch
Most factories hand you a fabric card and a promise. We hand you elongation and recovery figures measured on the actual knit we will bulk, so your claims survive scrutiny from buyers and reviewers alike.
Capacity that absorbs a re-order spike
With 10 production lines and 150,000 pieces of monthly capacity, a re-order after launch does not push your next delivery into next season. We hold the line plan and grade so repeat runs match the first.
Sampling that protects your launch date
Pre-production samples return in 7–15 business days after design confirmation. You approve fit and opacity before a single bulk unit is cut, which is far cheaper than fixing a container after it lands.
Customization Options
- Colourways: matched to Pantone or your physical swatch across the full tight and trim.
- Waistband height: low, mid or high rise, with optional V-seam or straight finish.
- Length: 7/8, full-length or cropped, with custom inseam grading per size.
- Print: all-over sublimation, placement heat-transfer, or tonal tone-on-tone panels.
- Pockets: hidden rear waist slip pocket, side seam zip pocket, or none.
- Branding: waistband embroidery, woven label, silicone logo, or heat-transfer mark.
- Fabric weight: choose 220, 240 or 260 gsm base knit for the season and climate.
- Packaging: individual polybag with care label, or folded and banded per colourway.
Order Information at a Glance
| Item | Standard Terms |
|---|---|
| Minimum order quantity | 1,000 pcs per style per colourway |
| Sampling | 7–15 business days after design confirmation; sample cost refundable against bulk |
| Bulk production | 25–45 business days after deposit and pre-production sample approval |
| Peak season (Q3–Q4) | 45–60 business days; plan ahead for season-start deadlines |
| Payment terms | 50% deposit to start, 50% before shipment; T/T and L/C accepted |
| Incoterms | EXW factory, or FOB / CIF on request |
| Quality assurance | In-line inspection plus AQL 2.5 final random inspection |
| Certifications | OEKO-TEX STANDARD 100, amfori BSCI, GRS 4.0 and Sedex SMETA in place |
Frequently Asked Questions
Can you prove the compression and recovery claims?
Yes. We measure elongation and recovery on the nominated base knit and return the figures with your pre-production sample. That gives your marketing team a defensible number rather than a vague “compression fit” label.
What is the minimum order for a new tight style?
The standard MOQ is 1,000 pieces per style per colourway. Because our tights, crops and bras share a knit platform, you can launch a small coordinated collection without one oversized commitment.
How do you stop the waistband from rolling?
The waistband is contoured to the natural waistline and bonded at the edge rather than simply elasticated. In fit testing we check forward fold and sit-up positions specifically, where rolling shows up in cheaper tights.
Do you offer recycled or certified fabrics?
Yes. We run GRS 4.0 recycled poly blends and hold OEKO-TEX STANDARD 100, amfori BSCI and Sedex SMETA, so the material story on your site can be supported with documentation.
How long from sample approval to a full container?
Bulk runs 25–45 business days after deposit and sample sign-off, stretching to 45–60 in the Q3–Q4 peak. Confirming early in the year is what protects a season launch date.
