Custom Compression Crop Top Sets — Matched Top and Legging Production
A matching set only works if the top and the bottom are the same garment, not two products that happen to share a colour name. The most common complaint about bought-in sets is that the crop and the legging drift apart after the first wash — different shade, different sheen, different stretch.
Passion Activewear manufactures custom compression crop top sets from Quanzhou Passion Clothing Co., Ltd., operating since 1999 across 10 production lines with 150,000 pieces of monthly capacity — so a full matched capsule can be cut, sewn and finished on one programme rather than sourced from two vendors.
-
01
Matched Top-and-Bottom Colour Story
Top and legging cut from the same dye and print batch, so the shade is identical on the shelf and after repeated washing.
-
02
Graded Compression Support
Compression engineered across the range, with higher support at the waistband and a lighter feel through the crop for studio wear.
-
03
Colour Consistent After Washing
Shrinkage and colour-fastness balanced between top and bottom, so the set still matches after the home-laundry cycle your customer uses.
What We Manufacture in This Category
- Buttery-Soft Fabric Yoga Tops — brushed peach-skin tops in longline and cropped silhouettes.
- Compression Sports Bras — low, medium and high impact bras with graded support and bonded seams.
- Compression Tights — squat-proof, high-stretch tights graded for training and studio wear.
- Slim-Fit Yoga Jackets — lightweight layering jackets with four-way stretch and clean zip detailing.
- Squat-Proof Leggings — opaque leggings tested under stretch with no sheerness at the knee or seat.
- V-Shape High-Waisted Capris — contoured high-rise capris with a supportive V-seam waistband.
- 4-Way Stretch Bike Shorts — cycle and training shorts in high-stretch knit with no-roll hems.
Hot-Selling Compression Crop Top Sets
The sets our brand and private label customers re-order most — high-waist legging with a matching cropped bra or crop, all graded to one colour standard so the pair reads as a single product on the rail.
Compression crop top sets
Send Inquiry
Fabric & Construction Engineering
A set fails when the top and the legging stretch, fade or shrink at different rates. Our build controls the knit, the dye and the compression profile together, so the two pieces behave as one garment across a season of wear.
- Main Fabric
- Polyester or nylon-spandex compression knit, 220–280 gsm, 4-way stretch with power through the waistband
- Alternative Fabrics
- Recycled poly-spandex (rPET) compression base, brushed soft-face option, or lighter 200 gsm for low-impact sets
- Moisture Management
- Wicking finish with documented dry-rate; mesh vent panels optional at the crop back and underarm
- Printing Techniques
- Full sublimation on white base, tonal screen print, heat-transfer and silicone logo application
- Embroidery
- Low-profile multi-head embroidery for small chest marks; flat sublimated branding preferred for soft-hand feel
- Hardware
- Encased wide waistband, removable pad option in the crop, bartack at all stress points
- Size Range
- Women’s XS–3XL, top and bottom graded to a single size matrix, custom charts supported
- Quality Standard
- In-line inspection at every stage plus AQL 2.5 final random inspection before packing
Set-specific build details
- Single dye and print batch for top and bottom, so the shade is identical rather than “close enough”.
- Matched stretch profile between crop and legging, so the set recovers the same way after a session.
- Bonded or flatlock seams selected per panel to keep the set smooth under light layer.
- Balanced shrinkage across both pieces, so the pair still lines up after the home-laundry cycle.
- Coordinated waistband power graded from the crop hem into the legging for a continuous line.
For capsule builders: tell us the full set at order stage — top, bottom and any bra — and we produce them as one programme with one quality standard and one ship date, instead of three separate orders that drift apart.
Why Brands Build Sets With Us
One colour standard across the set
Because the top and the legging are cut from the same batch record, the set stays matched through the season instead of fading into two different products after a few washes.
Compression you can grade
We tune the power profile per panel, so a studio set can feel light at the crop yet supportive at the waist — rather than one flat compression level applied everywhere.
Sampling that de-risks the capsule
Development samples run 7–15 business days after design confirmation, letting you wear-test the full set and adjust both pieces before committing to the 1,000-piece minimum.
Customization Options
- Set composition: crop top plus legging, or add a matching bra for a three-piece capsule.
- Compression level: light, medium or high, graded per panel across the set.
- Waistband: encased wide band, V-seam, or folded no-elastic finish.
- Colour: matched to Pantone or your physical swatch, top and bottom from one batch.
- Branding: tonal sublimation, silicone print, heat-transfer or low-profile embroidery.
- Pad option: removable cups, fixed cups, or shelf-only in the crop.
- Length: full-length, 7/8 or capri legging paired to the crop.
- Packaging: set-folded with belly band, or individual polybag with hangtag.
Order Information at a Glance
| Item | Standard Terms |
|---|---|
| Minimum order quantity | 1,000 pcs per style per colourway (set counted as one style) |
| Sampling | 7–15 business days after design confirmation |
| Bulk production | 25–45 business days after deposit and pre-production approval |
| Peak season (Q3–Q4) | 45–60 business days; early commitment recommended |
| Payment terms | 50% deposit, 50% before shipment; T/T and L/C accepted |
| Incoterms | EXW, FOB or CIF available |
| Quality assurance | In-line inspection plus AQL 2.5 final random inspection |
| Capacity | 10 production lines, 150,000 pcs monthly capacity |
Frequently Asked Questions
Will the top and legging truly match after washing?
Yes. They are cut from the same dye and print batch with balanced shrinkage, so the set keeps one shade and one sheen through repeated home laundering rather than drifting apart.
Can we order just the legging or just the crop?
We produce the set as one programme, but you can specify which pieces make up the style. A “set” is simply a top and bottom sharing one batch record and one colour standard.
What compression level should a studio set use?
Most studio sets use light-to-medium compression at the crop and medium-to-high at the waist. We grade the profile per panel once we know the intended use.
Do you offer recycled fabric for sets?
Yes. A recycled poly-spandex (rPET) compression base is available and can support GRS 4.0 claims when sourced through certified supply, with the same matched-batch control.
How is a set priced and moq’d?
A matched set counts as one style per colourway at our 1,000-piece minimum, which is simpler to plan than buying the top and bottom as two separate supplier orders.
